Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Bertazzoni specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 366-4775 Reserve a Visit
Error code · Range

Bertazzoni Professional Range Behavior “Cooling Fan Runs On After Switch-Off”: normal cool-down

On current Bertazzoni Professional, Master and Heritage ranges, such as the MAS366BCFGMXT, it is normal for the cooling fan to keep running, on and off, for up to 30 minutes after the oven is switched off.…

Low risk · DIY check OK
Reserve a Visit(713) 366-4775
Code
Cooling Fan Runs On After Switch-Off
Appliance
Range
Brand
Bertazzoni
Warranty
30-day workmanship

What Cooling Fan Runs On After Switch-Off means

On current Bertazzoni Professional, Master and Heritage ranges, such as the MAS366BCFGMXT, it is normal for the cooling fan to keep running, on and off, for up to 30 minutes after the oven is switched off. The fan is cooling the controls. The owner hears a fan or feels airflow near the panel after cooking is done, and may think the oven did not turn off.

Common causes of Cooling Fan Runs On After Switch-Off

  • Normal cool-down running of the cooling fan
  • Residual heat in the oven cavity after a long or high-temperature cook
  • Cabinet or vent blockage causing the fan to run longer
✓ One safe check you can try

1. Confirm the oven knobs and the burner knobs are in the OFF position. 2. Wait up to 30 minutes and listen for the fan to stop. 3. Check that no items are blocking the vents above the oven door. 4. If the fan runs for hours after the oven is off, call us.

! Why to stop there
  • The fan is wired into the control area, so there is nothing to adjust safely.
  • Cutting power to stop the fan can leave the controls without cooling.
  • A fan that never stops points to a control issue.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Igniters Spark After IgnitionBertazzoni DFS XT Range Behavior "Igniters Spark After Ignition": ignition micro-switches stay engaged Igniters Spark But No FlameBertazzoni DFS XT Range Behavior "Igniters Spark But No Flame": gas valve off or supply interrupted Ignition Candles Sparking ContinuouslyBertazzoni Professional Range Behavior "Ignition Candles Sparking Continuously": wet burner parts Oven Temperature Gauge DisagreesBertazzoni Range Behavior "Oven Temperature Gauge Disagrees": reference thermometer dial Power Failure WarningBertazzoni Professional Range Warning "Power Failure": do not use oven burners without power PRE-HEATING Light Flashing With AlarmBertazzoni DFS XT Range Alarm: PRE-HEATING light blinking with a cooling fan failure Range Does Not FunctionBertazzoni DFS XT Range Message "Range Does Not Function": no electrical power Smoke In The OvenBertazzoni Professional Range Behavior "Smoke In The Oven": temperature, fat and cleanliness
Cooling Fan Runs On After Switch-OffCooling Fan Runs On After Switch-Off questions
Is it a problem that the fan keeps running?

No. The fan may cycle on and off for up to 30 minutes after the oven is switched off to keep the controls cool. It will stop by itself.

Can I turn the fan off at the breaker?

We do not recommend it. Cutting power early takes cooling away just when the oven is still hot, which is the opposite of what the fan is for.

When should I call you?

If the fan runs for much longer than 30 minutes, or runs with the oven fully cold, we should check the controls. We give a written price before any work.

Book a visit

Still unsure about Cooling Fan Runs On After Switch-Off?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 366-4775
☎ Call the desk ▤ Reserve a Visit