Bertazzoni XV Wall Oven Message "CLEAN Light Flashing With Alarm": Power loss during cleaning

What CLEAN Light Flashing With Alarm (Sound On) means

On Bertazzoni knob-controlled 30-inch electric wall ovens such as the F30PROXV, F30CONXV and FD30PROXV, and on DFS XT dual-fuel ranges, a CLEAN light that flashes along with the alarm sound means electrical power failed during the self-clean cycle. The cleaning cycle was interrupted, and the cooling fans stay on to bring the oven temperature down. The door stays latched while the oven is still hot.

Common causes of CLEAN Light Flashing With Alarm (Sound On)

Power interruption or brief outage during the cleaning cycle
Breaker tripped while the oven was at cleaning temperature
Loose supply connection to the oven
Household voltage dipping under the load

✓ One safe check you can try

1. Turn both oven selectors to OFF to reset the alarm. 2. Let the cooling fans run until the oven is cool. 3. Check that the breaker has not tripped and that other kitchen items have power. 4. Wait 3 to 4 hours, then try the cleaning cycle again. 5. If the alarm returns without a power outage, call us.

! Why to stop there

A power loss at cleaning heat can leave the door latched and the oven hot for a long while.
A breaker that trips repeatedly points to something that should be tested by a technician.
Resetting selectors does not cure a supply problem.
We give a written price before work and warrant the repair for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Showroom ModeBertazzoni PROF and FPRO Oven Display Mode: showroom function keeping the oven cold Door Will Not Open (Self-Clean Active)Bertazzoni XV Wall Oven Message "Door Will Not Open": Self-Clean still active HEATING Light Flashing With AlarmBertazzoni XV Wall Oven Message "HEATING Light Flashing With Alarm": Temperature probe failure Knob Will Not Stay In PlaceBertazzoni Wall Oven Message "Knob Will Not Stay In Place": Retaining clip may be damaged Oven Does Not FunctionBertazzoni XV Wall Oven Message "Oven Does Not Function": no power reaching the oven Oven Is Not HeatingBertazzoni XV Wall Oven Message "Oven Is Not Heating": check power and temperature selection Oven Light Does Not WorkBertazzoni XV Wall Oven Message "Oven Light Does Not Work": bulb, power or clean cycle Oven Light Stays OnBertazzoni XV Wall Oven Message "Oven Light Stays On": door obstruction or bent hinge

CLEAN Light Flashing With Alarm (Sound On)CLEAN Light Flashing With Alarm (Sound On) questions

Why is the alarm sounding with the CLEAN light?

Because power was lost during the cleaning cycle. The oven recorded the interruption and warns you. Setting both selectors to OFF resets the alarm and lets the oven cool.

Why are the fans still running?

The cooling fans stay on after the interruption to bring the oven down from cleaning temperature. They will switch off themselves once the oven has cooled enough.

How long should I wait to clean again?

After the reset, wait 3 to 4 hours, then repeat the cleaning cycle. If the alarm returns with no outage or tripped breaker, call us so we can test the oven.

Bertazzoni XV Wall Oven Message “CLEAN Light Flashing With Alarm”: Power loss during cleaning

What CLEAN Light Flashing With Alarm (Sound On) means

Common causes of CLEAN Light Flashing With Alarm (Sound On)

Other Wall Oven codes

Still seeing CLEAN Light Flashing With Alarm (Sound On)?