Bertazzoni PROF and FPRO Oven Display Mode: showroom function keeping the oven cold

What Showroom Mode means

On current Bertazzoni built-in ovens, such as the PROF30FSEXV and FPRO30FSSTX, a showroom or demo function lets the display work normally while the oven draws no power for heating. The oven does not heat and does not consume power, yet the clock, lights and controls respond as they would on display in a store. If an oven that should heat stays cold, check whether the showroom function was left on after installation.

Common causes of Showroom Mode

The showroom or demo function still enabled from the store display
The function re-enabled by accident through a button combination
A heating problem only after the showroom function is confirmed off

✓ One safe check you can try

1. Read the display for any showroom or demo indication. 2. Turn the oven off and on again, then try a bake at 350F. 3. Check the control instructions that came with the oven for the way to switch the showroom function off, and follow them exactly. 4. If the oven still does not heat once the mode is off, call us.

! Why to stop there

Switching the mode off can depend on the exact model, and guessing at buttons can change other settings.
A cold oven after the mode is cleared is a heating or control part that needs live testing.
The back panel hides line-voltage wiring that you should not touch.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Condensation On Door GlassBertazzoni Wall Oven Message "Condensation On Door Glass": Normal cooking moisture Controls Are Very HotBertazzoni Wall Oven Message "Controls Are Very Hot": Door left open Display Error MessageBertazzoni LCD Wall Oven Message "Display Error Message": Note the display and call Door Locked After CoolingBertazzoni XV Wall Oven Message "Door Locked After Cooling": Latch needs a reset Door Will Not Open (Self-Clean Active)Bertazzoni XV Wall Oven Message "Door Will Not Open": Self-Clean still active HEATING Light Flashing With AlarmBertazzoni XV Wall Oven Message "HEATING Light Flashing With Alarm": Temperature probe failure Knob Will Not Stay In PlaceBertazzoni Wall Oven Message "Knob Will Not Stay In Place": Retaining clip may be damaged Oven Does Not FunctionBertazzoni XV Wall Oven Message "Oven Does Not Function": no power reaching the oven

Showroom ModeShowroom Mode questions

Why does my new oven light up but stay cold?

It may still be in showroom mode, which keeps the display working while the oven consumes no power and does not heat. Turning that function off normally restores heating.

How do I turn showroom mode off?

The method depends on the series. Check the control instructions for your model, or send us the model number and we will tell you the exact steps over the phone.

Is it covered by a warranty claim?

It is not a part failure, so it is simply a setting. We can switch it off on a visit, and our workmanship carries a 30-day warranty if anything else is repaired.