Bertazzoni Professional Range Warning "Anti-Tip Device Not Engaged": tip-over hazard

What Anti-Tip Device Not Engaged means

On current Bertazzoni Professional, Master and Heritage ranges, such as the PRO366BCFGMXT and HER366BCFGMXT, the anti-tip device is a safety warning rather than a displayed code. A child or an adult can tip over the range and be killed if the device is not installed and engaged. It must be re-engaged any time the range is moved, and the range must not be used without it. Nothing lights up; the danger is a range that can rock forward.

Common causes of Anti-Tip Device Not Engaged

The anti-tip bracket never installed or never engaged when the range was set
The range slid out for cleaning or service and was pushed back without re-engaging the device
The bracket loosened or mounted into a surface that cannot hold it

✓ One safe check you can try

1. Do not put heavy pots on the open oven door or let anyone climb on it. 2. If you pulled the range out, stop using it until the device is engaged. 3. Do not use the oven or cooktop until the device is confirmed in place. 4. Call us to check the bracket and reset the range properly.

! Why to stop there

The device sits at the rear base of the range, and confirming it means pulling a heavy gas appliance away from the wall.
Moving a gas range can bend or loosen the gas connection.
Fastening the bracket correctly depends on the floor and the wall material, which is easy to get wrong.
A badly mounted bracket gives a false sense of safety.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Flame Large Distorted or YellowBertazzoni DFS XT Range Behavior "Flame Large, Distorted or Yellow": clogged ports or wrong gas type Gas Oven Will Not OperateBertazzoni All-Gas Range Behavior "Oven Will Not Operate": check power, igniters and burner holes HBertazzoni Induction Range Code H: residual heat on the cooking zone HEATING Light Flashing With AlarmBertazzoni DFS XT Range Alarm: HEATING light blinking with oven temperature probe failure Igniters Do Not WorkBertazzoni DFS XT Range Behavior "Igniters Do Not Work": tripped circuit, blown fuse or no power Igniters Spark After IgnitionBertazzoni DFS XT Range Behavior "Igniters Spark After Ignition": ignition micro-switches stay engaged Igniters Spark But No FlameBertazzoni DFS XT Range Behavior "Igniters Spark But No Flame": gas valve off or supply interrupted Ignition Candles Sparking ContinuouslyBertazzoni Professional Range Behavior "Ignition Candles Sparking Continuously": wet burner parts

Anti-Tip Device Not EngagedAnti-Tip Device Not Engaged questions

How do I know the anti-tip device is engaged?

The rear leveling leg or base of the range should be held by the bracket. A quick test is to pull the open oven door gently down: the range should not lift. If you are unsure, do not rely on it.

Do I need to re-engage it after cleaning behind the range?

Yes. Any time the range is moved, the device has to be re-engaged before use. Skipping that step is the usual reason it is found disengaged.

Can you check it during a repair visit?

Yes. We confirm the bracket and the leg are engaged, adjust the range if needed, and tell you the price in writing before any other work.

Bertazzoni Professional Range Warning “Anti-Tip Device Not Engaged”: tip-over hazard

What Anti-Tip Device Not Engaged means

Common causes of Anti-Tip Device Not Engaged

Other Range codes

Still seeing Anti-Tip Device Not Engaged?