On Bertazzoni REF18WCB and REF24WCB built-in wine coolers, such as the REF24WCBPNV and REF18WCBPRV, E11 and E12 are the lower zone frosting probe codes. E11 means the probe is open, and E12 means it is shorted.…
On Bertazzoni REF18WCB and REF24WCB built-in wine coolers, such as the REF24WCBPNV and REF18WCBPRV, E11 and E12 are the lower zone frosting probe codes. E11 means the probe is open, and E12 means it is shorted. The buzzer sounds "tic" three times, the code flashes every 10 seconds, and the on/off key silences the buzzer. A service technician is needed.
1. Press the on/off key to silence the buzzer. 2. Check the bottom zone for frost on the back wall. 3. Keep bottles clear of the rear wall. 4. Read the lower zone with a thermometer after several hours. 5. Call us and tell us whether E11 or E12 appears.
At the cooling surface of the lowest zone of the cabinet. It reports frost conditions to the control, which cannot be done from the front of the cabinet.
E11 is an open circuit and E12 is a short circuit. Only one appears at a time. Telling us which you see speeds up the visit.
It might drift over time. Use a thermometer in the lower zone and move bottles if the reading leaves your range. We repair it after a written quote and give a 30-day workmanship warranty.
A technician diagnoses it on site and gives you the price in writing before any work starts.