Bertazzoni Legacy 24-Inch Dishwasher Code E4: Overflow in the base

What E4 means

On Bertazzoni legacy dishwashers such as the DW24XV, DW24XT, DW24PR and DW18PR, E4 is an overflow alarm. On the DW24XV and DW24XT it means some part of the dishwasher is leaking. On the DW24PR and DW18PR, water has flooded into the base and moved the detection switch. The machine stops and shows E4, and the base pan may hold water that has to be removed before another start.

Common causes of E4

Hose connection or door seal leaking into the base
Too much suds or a cycle that overfilled the tub
Leak from the pump, valve or a hose inside the cabinet
Detection switch held up by water standing in the pan

✓ One safe check you can try

1. Turn off the main water supply to the dishwasher at the valve. 2. Unplug the dishwasher or switch off its breaker. 3. Soak up any water on the floor and in the base pan with towels. 4. Look for a wet spot at the door seal or hose connection under the sink. 5. Do not restart it. Call us with the model number.

! Why to stop there

Water has to come out of the base before a restart, and finding where it came from takes a careful look.
Repeated starts with a leak can ruin the floor and cabinet under the dishwasher.
The base pan sits close to electrical parts, so it should not be reached with the power on.
We locate the leak first and give you a written price before any repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

E9Bertazzoni Legacy 24-Inch Dishwasher Code E9: Button held too long EdBertazzoni Legacy 24-Inch Dishwasher Code Ed: Signal response abnormal F1Bertazzoni Heritage Dishwasher Code F1: Overflow F2Bertazzoni Professional Dishwasher Code F2: Cannot discharge water F3Bertazzoni Master Dishwasher Code F3: Continuous water input F5Bertazzoni Heritage Dishwasher Code F5: Pressure system failure F6Bertazzoni Heritage Dishwasher Code F6: Heater sensor failure F7Bertazzoni Professional Dishwasher Code F7: Overheating

E4E4 questions

Should I shut off the water when I see E4?

Yes. Turn off the main water supply to the dishwasher and remove water from the base pan before calling. That limits damage while the cause is found.

Can too much detergent cause E4?

Heavy suds can push water out of the tub, and the switch in the base will react the same way as it would to a leak. Still, suds are a minor cause compared to a real leak, so have it checked.

Is E4 the same on all Bertazzoni dishwashers?

On the legacy 24-inch and 18-inch machines named here, yes, it is an overflow alarm. Newer Heritage, Professional and Master dishwashers use F1 for overflow instead.