Bertazzoni K36HERX/14 Canopy Hood Repair
A Heritage Series canopy and base hood, the K36HERX/14 spans 36 inches on the wall above a range of the same width. One motor delivers up to 600 CFM, and the canopy shape hides the blower from view until it needs attention.
We lift the canopy where needed and start with the filters, then run the motor through each speed to check for vibration. Lights and switches are tested, and the duct path is checked for restriction. If the motor hums but the airflow is poor, we look at the blower wheel for grease. A written price comes before work starts, and we cover the repair with a 30-day workmanship warranty.
We also check the filter retaining clips and the cord to the control, because small parts like these can cause rattles and dead switches. Tell us if the lights or fan stop working only when the hood is warm.
Check the filters first. If they are clean, a blower wheel caked in grease or a stuck damper is usually responsible, and we inspect both before looking at the motor.
Heat and steam rise into the hood, so bulbs and sockets take punishment. We test the socket and wiring as well as the bulb, since a worn socket will eat bulbs.
Not always. Filters, lights and switches are reachable from below without tools. We open the canopy only when the blower or its wiring has to be reached, and then we close it up carefully.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
