Bertazzoni Cooktop Code Fc: Overtemperature Shutdown, Let It Cool

What Fc means

On the legacy Bertazzoni induction cooktop P365IME, the control reads its own working temperature as too high, stops every heating element and shows F followed by a second letter, here Fc. On the PE244CER and PE304CER radiant cooktops, Fc is an overtemperature error from the touch sensor above 105°C. All heaters turn off, and the code clears once it drops below 95°C. The cooktop is unusable until then.

Common causes of Fc

Control temperature reading too high after long or heavy cooking
Airflow around the cooktop restricted
A temperature sensor or cooling issue if Fc returns on a cool cooktop

✓ One safe check you can try

1. Turn every zone off and let the cooktop cool down completely. 2. Check that nothing blocks the vents or the cabinet space below. 3. Wait until the display clears, then start again at a lower power setting. 4. If Fc returns while the cooktop is cool, stop and call us.

! Why to stop there

Overtemperature is a protection against damage, so cooking through it can harm the electronics.
Tracing the reading means testing sensors and the control board inside a live cooktop.
You see the price in writing before we begin, and we stand behind the repair for 30 days.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

UBertazzoni P304IAE Induction Cooktop Code U: No pan or inadequate pan u (pan symbol)Bertazzoni Professional Induction Cooktop Code u: No suitable cookware U400Bertazzoni Induction Cooktop Code U400: Supply connection Sudden Shutdown With Signal ToneBertazzoni Induction Cooktop Sudden Shutdown With a Signal Tone and Error Code Touch Controls UnresponsiveBertazzoni Induction Cooktop Touch Controls Unresponsive: Locked or Wet Keys FJBertazzoni Cooktop Code FJ: Security Key Error in the ADC FLBertazzoni Cooktop Code FL: Keyboard Error from Ambient Light Flashing Power Level DisplayBertazzoni Induction Cooktop Flashing Power Level: Pan Unsuitable or Under 4 Inches

FcFc questions

How long does Fc take to clear?

On the PE..CER the code clears once the touch sensor temperature falls below 95°C, so it depends on how hot the cooktop got. On the P365IME, simply allow the cooktop to cool down.

Is lowercase Fc the same as FC?

No. Fc means overtemperature, while capital FC on the PE..CER is a security key error for the on/off receiver. The case matters, so please read the display carefully before you call.

What should I avoid doing?

Do not keep restarting the cooktop while it is still hot. Let it cool, keep the vents clear and use lower power. If Fc comes back on a cold cooktop, we should test the sensor.