Bertazzoni DFS XT Range Alarm: CLEAN light blinking and beeping after a power failure

What CLEAN Light Flashing With Alarm (Sound On) means

On Bertazzoni DFS XT self-clean dual-fuel ranges with indicator lights, including the MAS365DFSXT and PRO304DFSXT, a CLEAN light that blinks along with an alarm tells you a power failure happened during the cleaning cycle. The range lost power, so the cycle did not finish. The recommended step is to repeat the clean cycle after waiting three to four hours so the oven can cool.

Common causes of CLEAN Light Flashing With Alarm (Sound On)

A household power outage or breaker trip during the clean cycle
A brief voltage dip that interrupted the cycle
A loose supply connection that dropped power for a moment

✓ One safe check you can try

1. Turn the selector to OFF and wait three to four hours for the oven to cool and the door to unlock. 2. Wipe loose debris from the cavity floor. 3. Start the CLEAN cycle again. 4. If the power cuts out again, check the breaker and call us.

! Why to stop there

Starting a clean cycle on a hot oven can overheat the controls and lock the door.
A power loss that repeats means a wiring or breaker problem that needs a proper check.
Opening the oven during the cool-down can burn you.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Power Failure WarningBertazzoni Professional Range Warning "Power Failure": do not use oven burners without power PRE-HEATING Light Flashing With AlarmBertazzoni DFS XT Range Alarm: PRE-HEATING light blinking with a cooling fan failure Range Does Not FunctionBertazzoni DFS XT Range Message "Range Does Not Function": no electrical power Smoke In The OvenBertazzoni Professional Range Behavior "Smoke In The Oven": temperature, fat and cleanliness Surface Burners Will Not IgniteBertazzoni Professional Range Behavior "Surface Burners Will Not Ignite": power, igniters and burner seating Flame Large Distorted or YellowBertazzoni DFS XT Range Behavior "Flame Large, Distorted or Yellow": clogged ports or wrong gas type Gas Oven Will Not OperateBertazzoni All-Gas Range Behavior "Oven Will Not Operate": check power, igniters and burner holes HBertazzoni Induction Range Code H: residual heat on the cooking zone

CLEAN Light Flashing With Alarm (Sound On)CLEAN Light Flashing With Alarm (Sound On) questions

Why is the CLEAN light blinking and beeping?

On the DFS XT ranges it signals a power failure during cleaning. The cycle was cut short, and the oven wants a fresh start once it has cooled.

How long should I wait before cleaning again?

Three to four hours is the recommended wait, so that the cavity and the door lock return to normal temperatures before the next full cycle begins.

What if the power did not go out?

Then look at the breaker and any shared circuit. If the alarm returns with steady power, we should check the range supply; we quote the price in writing first.