Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Bertazzoni specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 366-4775 Reserve a Visit
Error code · Range

Bertazzoni DFS XT Range Behavior “Igniters Spark But No Flame”: gas valve off or supply interrupted

On Bertazzoni DFS XT dual-fuel ranges, such as the MAS486GDFSXT and PRO366DFSXT, igniters that spark but produce no flame mean the gas supply valve is in the OFF position or the gas supply is interrupted. The…

High · stop use, call now
Reserve a Visit(713) 366-4775
Code
Igniters Spark But No Flame
Appliance
Range
Brand
Bertazzoni
Warranty
30-day workmanship

What Igniters Spark But No Flame means

On Bertazzoni DFS XT dual-fuel ranges, such as the MAS486GDFSXT and PRO366DFSXT, igniters that spark but produce no flame mean the gas supply valve is in the OFF position or the gas supply is interrupted. The spark works, so electrical power is present. The owner hears the clicking, turns the knob and sees no burner light, with no change after repeated tries.

Common causes of Igniters Spark But No Flame

  • The range gas shutoff valve in the OFF position
  • A gas supply interruption from the utility or an empty propane tank
✓ One safe check you can try

1. Turn all burner knobs off and wait a few minutes. 2. Check that the gas shutoff valve behind or near the range is open, with the handle in line with the pipe. 3. Check whether neighbors have gas, or look at the gauge on a propane tank. 4. If you smell gas, leave the house and call the gas utility from outside.

! Why to stop there
  • Repeated attempts can let gas gather around the burner.
  • Gas supply work has to follow code.
  • A restored supply can bring a burst of gas to every open burner.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

HBertazzoni Induction Range Code H: residual heat on the cooking zone HEATING Light Flashing With AlarmBertazzoni DFS XT Range Alarm: HEATING light blinking with oven temperature probe failure Igniters Do Not WorkBertazzoni DFS XT Range Behavior "Igniters Do Not Work": tripped circuit, blown fuse or no power Igniters Spark After IgnitionBertazzoni DFS XT Range Behavior "Igniters Spark After Ignition": ignition micro-switches stay engaged Ignition Candles Sparking ContinuouslyBertazzoni Professional Range Behavior "Ignition Candles Sparking Continuously": wet burner parts Oven Temperature Gauge DisagreesBertazzoni Range Behavior "Oven Temperature Gauge Disagrees": reference thermometer dial Power Failure WarningBertazzoni Professional Range Warning "Power Failure": do not use oven burners without power PRE-HEATING Light Flashing With AlarmBertazzoni DFS XT Range Alarm: PRE-HEATING light blinking with a cooling fan failure
Igniters Spark But No FlameIgniters Spark But No Flame questions
The igniters click but nothing lights. Why?

The spark is working, so the gas is not reaching the burner. On these ranges that means the gas valve is off or the supply has been interrupted.

Where is the gas shutoff?

It is usually on the pipe behind the range or in the cabinet next to it. Open means the handle runs in line with the pipe, closed means it sits across it.

What if I smell gas?

Leave the house right away, do not use switches, and call the gas utility from outside. We can work on the range once it has been declared safe.

Book a visit

Still seeing Igniters Spark But No Flame?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 366-4775
☎ Call the desk ▤ Reserve a Visit