Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Bertazzoni specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 366-4775 Reserve a Visit
Error code · Range

Bertazzoni DFS XT Range Behavior “Igniters Do Not Work”: tripped circuit, blown fuse or no power

On Bertazzoni DFS XT dual-fuel ranges, such as the MAS365DFSXT and PRO366DFSXT, burner igniters that do not click or spark point to a tripped circuit, a blown fuse, or a range that is not connected to…

Medium · inspection needed
Reserve a Visit(713) 366-4775
Code
Igniters Do Not Work
Appliance
Range
Brand
Bertazzoni
Warranty
30-day workmanship

What Igniters Do Not Work means

On Bertazzoni DFS XT dual-fuel ranges, such as the MAS365DFSXT and PRO366DFSXT, burner igniters that do not click or spark point to a tripped circuit, a blown fuse, or a range that is not connected to power. The gas burners rely on an electric spark to light. The owner turns a knob, hears no clicking and sees no spark, and may find the oven dead as well.

Common causes of Igniters Do Not Work

  • A tripped breaker for the range circuit
  • A blown fuse feeding the range
  • The range unplugged or disconnected from power after a move
✓ One safe check you can try

1. Check that the range clock or oven light is working. 2. Reset the breaker once if it tripped, or check the fuse. 3. Make sure the range is plugged in or properly connected after any move. 4. Dry the burners if they are wet and try again. 5. If you smell gas, leave the house and call the gas utility from outside.

! Why to stop there
  • Holding a knob open with no spark lets gas build up around the burner.
  • Lighting a burner with a match during a power loss can ignite a gas cloud.
  • Ignition parts run on line voltage behind the panel.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Flame Large Distorted or YellowBertazzoni DFS XT Range Behavior "Flame Large, Distorted or Yellow": clogged ports or wrong gas type Gas Oven Will Not OperateBertazzoni All-Gas Range Behavior "Oven Will Not Operate": check power, igniters and burner holes HBertazzoni Induction Range Code H: residual heat on the cooking zone HEATING Light Flashing With AlarmBertazzoni DFS XT Range Alarm: HEATING light blinking with oven temperature probe failure Igniters Spark After IgnitionBertazzoni DFS XT Range Behavior "Igniters Spark After Ignition": ignition micro-switches stay engaged Igniters Spark But No FlameBertazzoni DFS XT Range Behavior "Igniters Spark But No Flame": gas valve off or supply interrupted Ignition Candles Sparking ContinuouslyBertazzoni Professional Range Behavior "Ignition Candles Sparking Continuously": wet burner parts Oven Temperature Gauge DisagreesBertazzoni Range Behavior "Oven Temperature Gauge Disagrees": reference thermometer dial
Igniters Do Not WorkIgniters Do Not Work questions
The burners will not click. Is the gas off?

Not necessarily. The click comes from the electric igniters, so if they are silent the cause is more likely power than gas. Check the breaker and the fuse before anything else.

Can I light the burner with a match?

Only if you are sure there is no gas smell and you know your range allows it. When in doubt, do not. Call us and we will restore the ignition safely.

How fast can you come?

We aim for the earliest slot available in your area, and we give a written price before any work starts. Every repair we complete carries a 30-day workmanship warranty for your peace of mind.

Book a visit

Still seeing Igniters Do Not Work?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 366-4775
☎ Call the desk ▤ Reserve a Visit