Bertazzoni BMBI Refrigerator Icon: closed yellow padlock showing a locked temperature

What Closed Padlock Icon means

On Bertazzoni built-in bottom-mount refrigerators with a TFT display, such as the REF30BMBIPRT and REF36BMBIXRT, and on the columns, an open yellow padlock is normally displayed and you can scroll and select the temperature. A closed yellow padlock appears when a function such as Vacation, Shopping or FlexMode has been set. The temperature cannot be changed until the function is completed or deactivated manually.

Common causes of Closed Padlock Icon

A function such as Vacation or Shopping that is still running
FlexMode set for a compartment
A function activated by accident from the touch display

✓ One safe check you can try

1. Open the function menu on the display. 2. Look for the active function: Vacation, Shopping or FlexMode. 3. Deactivate that function by selecting it again and confirming. 4. Wait for the open padlock to return on the screen. 5. Then adjust the temperature as usual, and check the setting after a few minutes.

! Why to stop there

Nothing is broken, so a service visit is not needed yet.
Pressing at random can change other settings.
If the lock stays after the function is off, the display may need attention.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

Lower unit openBertazzoni BMBI Refrigerator Message "Lower unit open": freezer door left open Lower unit too coldBertazzoni REF30/36BMBI Message "Lower unit too cold": Freezer Drawer Running Below Setpoint Lower unit too warmBertazzoni REF30/36BMBI Message "Lower unit too warm": Freezer Above Its Target Power Failure!!Bertazzoni Column Refrigerator Message "Power Failure!!": Long Power Interruption Recorded Refrigerator too warm / Refrigerator too coldBertazzoni REF30/36BMBI Messages "Refrigerator too warm" and "too cold": Fresh-Food Side Off Target Replace filterBertazzoni REF30/36BMBI Message "Replace filter": Water Filter Cartridge at 30 Percent Sabbath ModeBertazzoni Column and Bottom-Mount Message "Sabbath Mode": Cooling On, Lights and Display Off Upper unit openBertazzoni REF30/36BMBI Message "Upper unit open": Fresh-Food Door Open Too Long

Closed Padlock IconClosed Padlock Icon questions

Why can I not change the temperature?

The closed padlock means a function such as Vacation, Shopping or FlexMode is active and is holding the temperature. Finish or turn off that function and the padlock opens.

How do I unlock it?

Deactivate the active function from the display, whether it is Vacation, Shopping or FlexMode. When that function is off, the padlock opens and the temperature can be set again like normal.

Will the function end by itself?

A function runs until it is completed or you turn it off by hand. If you are unsure which one is on, look through the function menu.