Bertazzoni French-Door Refrigerator Code E2: Freezer Compartment Sensor

What E2 means

On the Bertazzoni REF36FDFZXNT with Quattro Temp Zone, the REF36FDFIXNV and REF36FDFIXNB, and the RFD36FZNX and RFD36FZNW, E2 is the freezer temperature sensor message. The REF36FDFZXNT reports a failed sensor with a chime in locked mode. The other two platforms say the freezer room or chamber sensor has a problem, and the appliance can still cool and freeze. Treat the code as a sensor message rather than proof that the food has thawed.

Common causes of E2

A freezer sensor with an open or shorted reading
A damaged wire or connector in the freezer section
Frost or ice covering the sensor
A control board input that cannot read the sensor

✓ One safe check you can try

1. Silence the chime with any button on the REF36FDFZXNT. 2. Check that frozen food is firm and the freezer door closes fully. 3. Keep packages clear of the air slots at the back. 4. Wipe the gasket and look for ice at the door edge. 5. If E2 returns, avoid changing settings and call us.

! Why to stop there

The freezer probe is mounted behind the back panel and a wrong move can bend the cooling coil.
The same letters on other French-door generations mean other things, so online lookups may mislead you.
If the control cannot read the freezer, food can soften before anyone notices.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

Fridge too warmBertazzoni TFT Column Message "Fridge too warm": refrigerator section above its setting Ice Maker Does Not WorkBertazzoni BMBI Refrigerator Message "Ice Maker Does Not Work": icemaker off or water not connected Lower unit openBertazzoni BMBI Refrigerator Message "Lower unit open": freezer door left open Lower unit too coldBertazzoni REF30/36BMBI Message "Lower unit too cold": Freezer Drawer Running Below Setpoint Lower unit too warmBertazzoni REF30/36BMBI Message "Lower unit too warm": Freezer Above Its Target Power Failure!!Bertazzoni Column Refrigerator Message "Power Failure!!": Long Power Interruption Recorded Refrigerator too warm / Refrigerator too coldBertazzoni REF30/36BMBI Messages "Refrigerator too warm" and "too cold": Fresh-Food Side Off Target Replace filterBertazzoni REF30/36BMBI Message "Replace filter": Water Filter Cartridge at 30 Percent

E2E2 questions

Is the freezer still working with E2 on the display?

Yes. The freezer keeps working, and so does the refrigerator side. E2 only says the control cannot trust its freezer reading. Packages should stay hard, and a quick thermometer check confirms it.

How do I know if my frozen food is safe?

Check that it is hard and has no thawed liquid. A thermometer placed between packages should read 0F or lower. Soft, wet packages mean the freezer ran warm, and the food should be judged by how long.

Will you replace the sensor straight away?

First we measure it and the wiring. Only if the sensor is bad do we replace it, after giving you a written price. A loose connector costs less to fix.