Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Bertazzoni specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 366-4775 Reserve a Visit
Model library · Bertazzoni Range

PRO304BFEPXT

Bertazzoni PRO304BFEPXT Dual-Fuel Range Service

Bertazzoni range

Most common issues on this model

  1. Door that stays locked after self-clean
  2. Food probe giving wild numbers or going unseen when plugged in
  3. Broil element open while baking continues
  4. Digital gauge dimming or losing segments
  5. Igniter that keeps sparking once the flame is lit

The PRO304BFEPXT mixes gas burners on top with an electric self-clean oven below, so it sits in 30-inch slots that have both a gas line and a 240-volt outlet. The digital gauge and probe port make it popular with cooks who roast often.

Our visit starts with the lock. Self-clean runs at very high heat, and the latch motor is the part that most often jams afterward. We then plug in the food probe and compare its reading to a thermometer. The bake and broil elements are checked one by one, and the digital display is looked over for dim or missing segments.

On top, a burner that keeps sparking after it is lit points to a sensor or a damp igniter. A gas smell calls for leaving the house and phoning the gas utility from outside. Our price is given in writing before work begins.

Key features

  • Professional Series dual-fuel range for a 30-inch opening
  • Four brass MonoBloc burners on top, self-cleaning electric oven below
  • Oven of 4.6 cu ft with a pair of convection fans on 7 shelf levels
  • Digital gauge and food-probe controls on the bezel
  • Soft-close door with tempered glass edge to edge
→Codes

Error codes this model can show

PRO304BFEPXTPRO304BFEPXT questions
Why won't my oven door unlock after self-cleaning?

The oven must cool first. If the door stays locked, the latch motor or its switch is sticking from the heat. We test the latch, free or replace it, and check that the door locks and releases properly.

My food probe gives odd temperatures. Is the probe bad?

It can be, but the jack in the oven wall is also a common cause. We test the probe resistance, inspect the jack for damage, and compare the display with a separate thermometer before replacing anything.

The burner keeps clicking even when it is lit. What do I do?

Continuous sparking usually means the igniter is damp, dirty, or not sensing the flame. We clean the head and electrode, check the spark module, and replace whichever part keeps the spark running.

Book a visit

Book repair for your PRO304BFEPXT

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Reserve a Visit