Bertazzoni Cooktop Overflow Protection Shutdown: Et on Induction, FC on Radiant

What Overflow Protection Shutdown means

On Bertazzoni professional induction cooktops such as the PE244INDXV, PE304INDXV and PE365INDXV, spilled liquid trips the overflow protection and the display shows Et. On the radiant PE304CER, a spill shuts the zones down and shows FC with a beep. In both cases, the cooktop stops heating until you remove the liquid and switch it back on. The cooktop simply refuses to heat while liquid is detected.

Common causes of Overflow Protection Shutdown

Boiled-over liquid on the control area or glass
A pot filled too high that bubbled over
Moisture left on the keys after cleaning

✓ One safe check you can try

1. Switch the cooktop off and take the pan away. 2. Wipe up every drop of liquid from the glass and around the controls. 3. Dry the surface completely with a soft cloth. 4. Switch the cooktop back on; if Et or FC remains on a dry surface, call us.

! Why to stop there

Et or FC after a spill is the cooktop protecting itself, and drying the glass is usually enough.
If the code stays on a dry surface, the key circuit needs testing under the glass.
We give a written price first, with a 30-day workmanship warranty on the work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Sudden Shutdown With Signal ToneBertazzoni Induction Cooktop Sudden Shutdown With a Signal Tone and Error Code Touch Controls UnresponsiveBertazzoni Induction Cooktop Touch Controls Unresponsive: Locked or Wet Keys UBertazzoni P304IAE Induction Cooktop Code U: No pan or inadequate pan u (pan symbol)Bertazzoni Professional Induction Cooktop Code u: No suitable cookware U400Bertazzoni Induction Cooktop Code U400: Supply connection HBertazzoni Cooktop H on the Display: Residual Heat Indicator LBertazzoni Induction Cooktop Code L: Child lock activated FABertazzoni Cooktop Code FA: Security Key Error in the On/Off Key Emitter

Overflow Protection ShutdownOverflow Protection Shutdown questions

What code will I see after a boil-over?

Induction models in the PE..INDXV series show Et. The radiant PE..CER shows FC and beeps. Both mean the same thing: liquid has triggered the overflow security.

Do I need to reset anything?

Just remove the spilled liquid and switch the cooktop back on. No special reset is required when the protection tripped because of a spill. No special reset is needed.

Why does FC sometimes mean something else?

On the PE..CER, FC is also a security key error for the on/off receiver. If the glass is clean and dry and FC remains, that is the key circuit rather than a spill, and it needs a technician.