Bertazzoni Bottom-Mount Refrigerator Code CE: Main Board and Display Not Talking

What CE means

On Bertazzoni bottom-mount refrigerators such as the REF24BMBIPNV, REF24BMFIXNV and RBM24F4FXNV, code CE reports a communication problem between the main board and the display panel. The appliance still cools, so food is not in immediate danger. What you notice is the code on the display and buttons that may respond slowly or not at all. Until it is repaired, settings may be hard to change from the panel.

Common causes of CE

A loose or pinched cable between the display panel and the main board
A display panel with a damaged connector or electronics
A main board that has stopped answering the display
A power surge or outage that left the two boards out of step

✓ One safe check you can try

1. Note whether the compartments are still cold. 2. Switch the appliance off at the breaker for one minute, then back on. 3. Wait several minutes and see if CE returns. 4. Keep the doors closed as much as you can in the meantime. 5. If CE comes back after the restart, call us to look at the controls.

! Why to stop there

Reaching the board or the display cable means taking the control housing apart while the unit is connected to power.
A cable problem and a board problem produce the same code, so only measuring tells which is which.
Repeated power cycling can stress the electronics when the real cause is a loose connector.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

Lower unit openBertazzoni BMBI Refrigerator Message "Lower unit open": freezer door left open Lower unit too coldBertazzoni REF30/36BMBI Message "Lower unit too cold": Freezer Drawer Running Below Setpoint Lower unit too warmBertazzoni REF30/36BMBI Message "Lower unit too warm": Freezer Above Its Target Power Failure!!Bertazzoni Column Refrigerator Message "Power Failure!!": Long Power Interruption Recorded Refrigerator too warm / Refrigerator too coldBertazzoni REF30/36BMBI Messages "Refrigerator too warm" and "too cold": Fresh-Food Side Off Target Replace filterBertazzoni REF30/36BMBI Message "Replace filter": Water Filter Cartridge at 30 Percent Sabbath ModeBertazzoni Column and Bottom-Mount Message "Sabbath Mode": Cooling On, Lights and Display Off Upper unit openBertazzoni REF30/36BMBI Message "Upper unit open": Fresh-Food Door Open Too Long

CECE questions

Does CE mean the cooling has stopped?

No. The appliance still cools while CE is displayed. The code reports that the display and the main board are not exchanging information, so you may lose control of settings until it is repaired.

Can a power cut cause this?

It can. An outage or surge can leave the two boards out of sync. A single restart often clears that. If CE returns repeatedly, something is physically wrong with the link.

What happens if I ignore CE?

The cooling continues, but you cannot count on the buttons, alarms or temperature changes. If the main board is the one failing, the cooling can eventually be affected, so we suggest a visit soon.