Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Bertazzoni specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 366-4775 Reserve a Visit
Model library · Bertazzoni Range

MAS305DFMXV

Bertazzoni MAS305DFMXV Dual-Fuel Range Repair

Bertazzoni range

Most common issues on this model

  1. Broiler element out while baking is still accurate
  2. Dial gauge that trails the real temperature in the oven
  3. Bake element open after years of heating and cooling
  4. Flame on the power burner standing off the cap
  5. Convection motor that hums but does not turn

The MAS305DFMXV pairs a five-burner gas top with an electric oven, so it needs both a gas line and a 240-volt supply. You will find it in freestanding slots where cooks want strong flame on top and steady electric heat for baking.

Our visit begins on the cooktop. We light the dual-ring power burner and check that both rings come on and the flame sits on the cap rather than lifting away from it. We run the simmer burner at its lowest setting to confirm it stays lit.

In the oven we separate the bake and broil elements and measure each, because one can open while the other still works. The analog gauge is compared against a thermometer, since a slow gauge can mislead you into thinking the oven is wrong. If you smell gas, step outside and call the gas utility first. After that, we will give a written price before repairing anything.

Key features

  • Master Series dual-fuel range for 30-inch openings
  • Five gas burners on top, electric oven below
  • Oven of 4.7 cu ft with a pair of convection fans
  • 4.7 cu ft oven with two convection fans
  • Electric broiler, with convection available
  • Analog temperature gauge and soft-motion door
→Codes

Error codes this model can show

MAS305DFMXVMAS305DFMXV questions
Why does my broiler stay cold when the oven still bakes?

The broil and bake elements are separate and each can fail on its own. We test the broil element for continuity and the relay or wiring feeding it, and the repair is usually a single element.

The power burner flame lifts off the cap. What is wrong?

Lifting usually means the burner ports are partly blocked or the cap is not seated correctly. We clean the ports, set the cap, and check gas pressure to the burner so the flame holds steadily on both rings.

My convection fan hums but does not spin. Can it be fixed?

A humming fan often has a seized bearing or a failed motor. We remove the rear cover, spin the blade by hand, and replace the motor if it drags, then confirm even heat with a test bake.

Book a visit

Book repair for your MAS305DFMXV

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Reserve a Visit