Bertazzoni Radiant Ceramic Cooktop Code FP: Fan error

What FP means

On Bertazzoni radiant (Hi-light) ceramic cooktops in the PE..CER range, such as the PE304CER and PE244CER, FP is a fan error shown on the heater display. The cooktop uses a fan to keep its electronics cool, and the control has noticed a problem with it. You may see FP along with reduced heating, or after long use at high settings.

Common causes of FP

Cooling fan not turning
Airflow under the cooktop blocked by items stored in the cabinet
Wiring or connector to the fan loose
Control not receiving the fan signal

✓ One safe check you can try

1. Turn all heaters off and let the cooktop cool. 2. Open the cabinet below and remove anything that touches the underside of the cooktop. 3. Make sure vents are not covered by a drawer or a shelf. 4. Switch the cooktop off at its breaker for one minute, then back on. 5. If FP returns, call us.

! Why to stop there

A fan that does not run can let the electronics overheat.
Reaching the fan means taking out the cooktop, which we do not ask owners to do.
Stored items blocking airflow have to be cleared first.
We give a written price first, and our repair has a 30-day warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Touch Controls UnresponsiveBertazzoni Induction Cooktop Touch Controls Unresponsive: Locked or Wet Keys UBertazzoni P304IAE Induction Cooktop Code U: No pan or inadequate pan u (pan symbol)Bertazzoni Professional Induction Cooktop Code u: No suitable cookware U400Bertazzoni Induction Cooktop Code U400: Supply connection Sudden Shutdown With Signal ToneBertazzoni Induction Cooktop Sudden Shutdown With a Signal Tone and Error Code FEBertazzoni Radiant Ceramic Cooktop Code FE: Touch NTC short FHBertazzoni Radiant Ceramic Cooktop Code FH: EEPROM checksum error FJBertazzoni Cooktop Code FJ: Security Key Error in the ADC

FPFP questions

Why does a radiant cooktop have a fan?

Heat from the elements warms the electronics under the glass. The fan moves air across them to keep them within their limit. If it fails, the control reports FP.

Could my cabinet storage cause FP?

Yes. Pans or boxes pressed against the underside can block airflow. Clear that space first, since it costs nothing and may be the whole answer.

Is it safe to cook with FP showing?

We would not. The fan protects the control, so keep the cooktop off until it has been checked. We test the fan and give a written price first.