Bertazzoni PM360IGX Segmented Induction Repair
The PM360IGX is a 36-inch segmented induction cooktop with five zones, part of the Professional Series. The segmented design means the cooktop is a defined module, installed on its own or next to other modules, so access depends on how the surrounding counter is built.
Induction needs steady power and good airflow. We check the circuit feeding the cooktop, the fan intake, and then test each zone with a known induction pan. A zone that cycles on and off could be overheating or reading its pan badly, and we separate those by testing the coil and sensor. A control that responds oddly gets a cleaning and a board check.
You will see the price in writing before we begin, and our work carries a 30-day workmanship warranty.
The cooktop may be limiting heat because of poor airflow or a pan that sits unevenly. We check the fan and intake, then test the coil and sensor.
Not for the cooktop itself. We sometimes need access from beneath to reach the electronics, so clearing the cabinet space under the cooktop ahead of our visit makes the work go faster.
Residue on the glass or a weakening control board usually explains it. We clean the surface thoroughly and test the control board if the lag stays, since a worn board responds late.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
