Bertazzoni PE304INDXV Cooktop Stops Heating: Overheating, Fan or Detection Issue

What Operation Stops With Overheat Icon means

On Bertazzoni professional induction cooktops such as the PE244INDXV, PE304INDXV and PE365INDXV, the power indicator can be on while the heating does not start. The official causes are an overheated cooktop (blocked ventilation paths or a high room temperature), a cooling fan that is not working, or a technical error. A separate case, where operation stops suddenly and the pan icon shows, means the automatic detection function has failed.

Common causes of Operation Stops With Overheat Icon

Overheating from blocked ventilation paths or high ambient temperature
A cooling fan that is not running
A failure of the automatic pan detection, shown with the pan icon
A technical error in the cooktop

✓ One safe check you can try

1. Switch the cooktop off and let it cool for a while. 2. Make sure the ventilation paths around and under the cooktop are not blocked. 3. Restart with a flat magnetic pan centered on the zone. 4. If it stops again or the pan icon returns, stop and call us.

! Why to stop there

Repeated stops from overheating can damage the electronics, so pushing on is a bad idea.
A fan or detection problem needs testing inside a live induction unit.
We quote in writing before any work, and the repair is covered by 30 days of workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Sudden Shutdown With Signal ToneBertazzoni Induction Cooktop Sudden Shutdown With a Signal Tone and Error Code Touch Controls UnresponsiveBertazzoni Induction Cooktop Touch Controls Unresponsive: Locked or Wet Keys UBertazzoni P304IAE Induction Cooktop Code U: No pan or inadequate pan u (pan symbol)Bertazzoni Professional Induction Cooktop Code u: No suitable cookware U400Bertazzoni Induction Cooktop Code U400: Supply connection LBertazzoni Induction Cooktop Code L: Child lock activated FABertazzoni Cooktop Code FA: Security Key Error in the On/Off Key Emitter No pan symbolBertazzoni Induction Cooktop Message "No Pan Symbol": Pan removed from zone

Operation Stops With Overheat IconOperation Stops With Overheat Icon questions

Is there an overheat icon on this cooktop?

The pan icon is what appears when operation stops suddenly because detection has failed. Overheating shows up as a power indicator that stays on while heating does not start.

What can I do about overheating myself?

Let the cooktop cool, and make sure the ventilation paths are free and the kitchen is not unusually hot. Do not store items underneath that block airflow.

How do I tell a fan problem from detection failure?

A fan problem usually comes with the power indicator on and no heating, often after the cooktop has run a while. A detection failure stops cooking suddenly with the pan icon. We test both on site.