Bertazzoni Induction Cooktop Code Et: Overflow Protection Tripped

What Et means

On Bertazzoni professional induction cooktops such as the PE244INDXV, PE304INDXV and PE365INDXV, Et means the overflow protection has tripped. Liquid has spilled on the cooktop. The remedy is to remove the spilled liquid and switch the cooktop back on. Heating stops while Et shows. Owners usually see it after a pot boils over onto the glass or controls. The cooktop stays out of action until the surface is dry.

Common causes of Et

Liquid boiled over onto the glass or controls
Moisture left on the keys after cleaning
A spill that has run beneath a pan

✓ One safe check you can try

1. Switch the cooktop off and remove the pan. 2. Wipe up all spilled liquid from the glass and the control area. 3. Dry the surface completely. 4. Switch the cooktop back on; if Et stays on a dry surface, call us.

! Why to stop there

Et protects the electronics from liquid, so ignoring it is not wise.
If it stays with a dry surface, the sensing under the glass needs a technician.
You get a written price first, and a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Sudden Shutdown With Signal ToneBertazzoni Induction Cooktop Sudden Shutdown With a Signal Tone and Error Code Touch Controls UnresponsiveBertazzoni Induction Cooktop Touch Controls Unresponsive: Locked or Wet Keys UBertazzoni P304IAE Induction Cooktop Code U: No pan or inadequate pan u (pan symbol)Bertazzoni Professional Induction Cooktop Code u: No suitable cookware U400Bertazzoni Induction Cooktop Code U400: Supply connection FdBertazzoni Radiant Ceramic Cooktop Code Fd: On/Off LED error Some Keys Not WorkingBertazzoni Induction Cooktop With Dead Keys or an Odd Display: Board Error FEBertazzoni Radiant Ceramic Cooktop Code FE: Touch NTC short

EtEt questions

Is Et an error or a warning?

It is a protection response. The overflow sensing noticed liquid, so the cooktop stopped heating. Cleaning the spill and switching it back on normally resolves it.

Why does the cooktop not restart immediately?

Any moisture left on the keys can keep the protection active. Dry the glass thoroughly, including the edges, before you switch the cooktop on again.

When does Et mean a repair?

If Et appears on a perfectly dry and clean cooktop, the overflow sensing may be reading wrongly. We would test it and give you a price in writing first.