Bertazzoni Induction Cooktop Flashing Power Level: Pan Unsuitable or Under 4 Inches

What Flashing Power Level Display means

On legacy Bertazzoni induction cooktops such as the P304IX, P365IX and P365IME, the digital power indicator keeps flashing after you turn an element on and set a pot or pan on it, and there is no heat. The official reason is that the pan is not suitable for induction cooking, or its diameter is under 10 cm (4 in). Nothing is broken; the cooktop simply does not detect usable cookware.

Common causes of Flashing Power Level Display

Cookware that is not magnetic or not induction compatible
A pan whose base is smaller than 4 inches
A pan placed off center on the zone

✓ One safe check you can try

1. Test the pan with a magnet; it should stick firmly to the bottom. 2. Use a pan with a base of at least 4 inches and center it on the marked zone. 3. Turn the element off, set the correct pan on it, and turn it on again. 4. If a suitable pan still gets no heat and the display keeps flashing, call us.

! Why to stop there

A flashing display is usually the cookware, so a repair visit would not help.
If proper pans also fail, the sensing needs testing with the right equipment.
We give a written price first, and a 30-day workmanship warranty covers the work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

UBertazzoni P304IAE Induction Cooktop Code U: No pan or inadequate pan u (pan symbol)Bertazzoni Professional Induction Cooktop Code u: No suitable cookware U400Bertazzoni Induction Cooktop Code U400: Supply connection Sudden Shutdown With Signal ToneBertazzoni Induction Cooktop Sudden Shutdown With a Signal Tone and Error Code Touch Controls UnresponsiveBertazzoni Induction Cooktop Touch Controls Unresponsive: Locked or Wet Keys FHBertazzoni Radiant Ceramic Cooktop Code FH: EEPROM checksum error FJBertazzoni Cooktop Code FJ: Security Key Error in the ADC FLBertazzoni Cooktop Code FL: Keyboard Error from Ambient Light

Flashing Power Level DisplayFlashing Power Level Display questions

Why does the number flash but nothing heats?

The cooktop is telling you it cannot use the pan. Either the pan is not induction compatible or its base is under 10 cm (4 in), so the element refuses to start.

Will a small saucepan work?

Only if its base reaches the minimum of 4 inches. A smaller pan is treated as unsuitable, and the display keeps flashing instead of heating.

How do I know my pans are induction compatible?

A magnet that clings to the base is the simple test. Aluminum, copper and glass without a magnetic layer will not work. If magnetic pans of the right size are ignored, we should test the cooktop.