On Bertazzoni knob-controlled 30-inch electric wall ovens such as the F30PROXV, F30CONXV and FD30PROXV, and on the DFS XT dual-fuel ranges, a light lens cover that will not come off is usually held by debris or…
On Bertazzoni knob-controlled 30-inch electric wall ovens such as the F30PROXV, F30CONXV and FD30PROXV, and on the DFS XT dual-fuel ranges, a light lens cover that will not come off is usually held by debris or spillage around the lens. On the DFS XT it is soil build-up. The lens simply does not turn or lift because grime has stuck it in place.
1. Switch the oven off at the controls and let it cool completely. 2. Wipe the lens cover area with a clean, dry towel to loosen debris and spillage. 3. Try removing the lens again by hand with gentle pressure, as shown in the oven's care instructions. 4. Do not force it or use tools. 5. If it stays stuck, call us.
Dried spillage or soil that built up around the edge. Wiping the area with a clean dry towel after the oven has cooled often frees it without any tools.
The simple remedy is a clean dry towel. Liquid cleaners can run into the socket, so do not spray the area. If dry wiping does not free the lens, call us.
No. Let the oven cool, and switch it off first. If the lens will not come off, leave the bulb alone and call us to handle it.
A technician diagnoses it on site and gives you the price in writing before any work starts.