Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Bertazzoni specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 366-4775 Reserve a Visit
Model library · Bertazzoni Cooktop

QB36M500X

Bertazzoni QB36M500X Cooktop Service Visit

Bertazzoni cooktop

Most common issues on this model

  1. Burner makes sparks but no flame
  2. Weak or fluttering flame on the smaller burner positions
  3. Spark module keeps clicking after ignition
  4. Gas valve feels sticky or knob rotates without lighting

Owners of the QB36M500X have a Master Series gas cooktop, 36 inches wide with five burners and a low profile top that drops into a standard counter cutout. Because it is a drop-in, it usually sits above a cabinet base, and the gas connection is reached through the cabinet underneath.

A burner that will not light is the call we hear most. We pull the cap, inspect the igniter, clear the ports and test for a good spark. Where flame is present but weak, we look at the burner head and the valve instead. After a few years, the grease from regular frying can harden near the ports, so we also check the surrounding area.

For any gas odor, leave the building and call the gas utility from outside. We then schedule an inspection, quote the repair in writing, and cover our work with a 30-day workmanship warranty.

Key features

  • 36-inch gas cooktop
  • Drop-in low profile design
  • 5 burners
  • Master Series
→Codes

Error codes this model can show

QB36M500XQB36M500X questions
Where do you access the gas connection on a drop-in cooktop like the QB36M500X?

We reach it from the cabinet beneath the cooktop, where the supply line, shutoff and electrical connection are located. It helps to empty the cabinet before we arrive so there is room to work safely.

Why does the flame on my QB36M500X flutter on low?

Fluttering on low often comes from partly blocked ports, a cap sitting off center, or drafts from an open window or a strong hood fan. We clean the ports, reseat the cap, and check that the hood is not pulling the flame sideways.

Should I replace all igniters at once?

No. We replace only the igniters that test poor or show cracks. Igniters wear at different rates depending on how often each burner is used, so a blanket replacement adds cost without fixing anything that is working.

Book a visit

Book repair for your QB36M500X

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Reserve a Visit